Lubricants


Lubricants

Grease →


F01


Standard grease for open gears
Grease F01 | DIN 51825 OGP0N-30 | NLGI-Claas 0…1
– based on lithium/calcium complex with extrem pressure additives,
which are combined with the soap structure so that an optium
adhesiveness to the metal surface is possible.
– heat-resistant, good corrosion protection attributes, contains no firm
components.
Application:
– had been developed as special grease for high loaded open gears.
– due to the high temperature properties usable for a wide range of
applications, where high temperature and high load exist.
– also recommended for slide bearings/bushes.temperature range -30°C to +150°C

F02

With H1-approval
Grease F02 | DIN 51502 KP2R-20 | NLGI-Claas 2
– synthetic special grease for high temperatures based on
synthetic hydrocarbons with a partial special thickener of high metal
affinity.
– NSF/H1-registration
Application:
water (cold, hot) and steam resistant; high thermal and oxidation
stability; for high load; very good wear-protection; high service life
and wide temperature range; optimum lubricating effect at low
friction valuesTemperature range -40° C to +140° C

F03

Special grease for linear guideways & ball screws
Grease F03 | DIN 51825 KP2K-20 | NLGI-Claas 2
– short-fibred and homogeneous lithium-saponified universal grease
based on mineral oil. It can be used for roller and slide bearing
lubrication and is appropriate for medium and high load
applications.
– very adhesive; appropriate for short-stroke applications.
– water resistant and protective against corrosion.
Application:
– lubrication of linear guidance (recirculating ball bearing and ball screws)
– in combination with a lubrication pinion and continuous re-
lubrication suitable for open gear lubrication
– very well pumpable in relubrication unitstemperature range -20°C to +120°C

F04

Special grease for bearings
Grease F04 | DIN 51502 KP2K-20 | NLGI-Claas 2
– multipurpose graese based on lithiums-calcium-soap with
EP additivies
– suitabel for bearings with middle-range loads
Application:
– lubrication of bearings and ball screws
– in combination with a lubrication pinion and continuous re-
lubrication suitable for open gear lubrication
– well pumpable in relubrication units and distributorstemperature range -30°C to +130°C

F05

Special grease for rack and bearings
Grease F05 | DIN 51502 KPF2-P | NLGI-Claas 2
– aluminium complex soap and graphite
– based on a high quality mineraloil
– optimum adhesiveness and good corrosion protection
Application:
– lubrication of extrem loaded open racks
– up to 0°C very good pumpabletemperature range -20°C to +150°C

F06

Special adhesion lubricant
Grease F06
– synthetic highly viscous lubricant
– execellent corrosion protection
– very wide temperature range
Application:
– lubrication of highly stressed wear points (e.g. racks/pinions, chains)
– water resistance
– very high adhesion prohibits centrifuge of lubricant
– pumpable in lubrication systems: 0°C … +80°Ctemperature range: -15°C …. +250°C

F07

Special high-temperature grease for bearings
Grease F07 | DIN 51825 KPHC2P-40 | NLGI-Claas 2
– synthetic grease
– sligth content of PTFE as solid-particels
– wide temperature range
Application:
– sleeve and/or roller bearing; jackscrews; linear guidance
– pumpable in lubrication systems: -40°C … +80°Ctemperature range: -40°C …. +160°C

F08

Low-temperature special grease for bearings
Grease F08 | DIN 51502 KP HC 2 P-40 | NLGI-Claas 2
– synthetic grease
– execellent wear and corrosion protection
– wide temperature range
Application:
– sleeve and/or roller bearing; jackscrews; linear guidance
– pumpable in lubrication systems: -25°C … +80°Ctemperature range: -40°C …. +180°C

F09

Special grease for highspeed roller bearings
Grease F09 | DIN 51502 KP 2K-30 | NLGI-Claas 2
– special lithium complex soap
– based on mineral oil
Operative range:
– sleeve and/or roller bearing; jackscrews; linear guidance
– conveying in lubrication systems: -15°C … +80°Ctemperature range: -10°C …. +80°C

F10

Longterm grease for bearings
Grease F10 | NLGI-Claas 2
– lithium soap
– excellent wear protection
– good protection for deterioration/weathering
– best performance for high- and low-temperature applications
Operative range:
– sleeve and/or roller bearing; jackscrews; linear guidance
– conveying in lubrication systems: -20°C … +80°Ctemperature range: -10°C …. +140°C

F11

Special grease for highspeed bearings
Grease F11 | DIN 51825 KP 1 K-20 | NLGI-Claas 1
– special lithium soap
– excellent wear protection
– good emergency running properties
– best performance in lubrication systems
Operative range:
– sleeve and/or roller bearing; jackscrews; linear guidance
– conveying in lubrication systems: -20°C … +80°Ctemperature range: -20°C …. +120°C

|


Oil →


OE1

Capable of creep oil for chains
Oil OE1
– highly visscous and very capable of creep
– synthetic white oil
– adherent with good EP and boundary lubrication capabilities
Operative range:
– lubrication of chains and sleeve-bearings
– conveying in lubrication systems: +5°C … +65°Ctemperature range: -10°C …. +80°C

OE3

Oil with H1-approval
Oil OE3
– paraffin oil
– H1 approval
– excellent protection for deterioration/weathering
Operative range:
– lubrication of chains and sleeve-bearings
– conveying in lubrication systems: +5°C … +80°Ctemperature range: -15°C …. +120°C

Downloads

You will also find comprehensive information in our catalog

.

Catalog ->  Katalog


Contact

Do you have questions about this product ?

Notice Privacy

Top | Back